Motorcycles Liquid Gasket Sealent White 100g

1211-100
SOLD AS EACH
Threebond Liquid Gasket, silicone high temperature, 250c white 100g tubes, superior resistance to engine and gear oil, most commonly used on crank cases & gearboxes or wherever a high temperature and high stress tolerant gasket sealer is required. Can be used on cars / motorcycles and is excellent for race teams performance applications.
Threebond 1211 is the highest spec and latest silicone sealer that THREEBOND manufacture. White in colour, this sealer has exceptional resistance to oils, petrol and methanol. This can be used instead of gaskets on metal to metal joints and also supplement solid gaskets.
It's a one component silicone, which remains flexible and has no shrinking effect whilst curing. It remains stable between -60deg C and +250 deg C.
Most people think of silicone as RTV, which has a bad smell. 1211 has no acetic acid in its composition at all. This Cures and becomes tack free in about 30mins. Fully cures in 24 hours at 25 Deg C giving you plenty of time to assemble your components. Optimum strength is in 3 days. Although this product skins over quickly, curing from the outside in.
As with all Threebond products, thoroughly clean the surfaces, don't leave any oil on them at all. Degrease with thinners, cut the nozzle to the correct bead size apply evenly to only one surface by pushing the sealant ahead to get a uniform bead then proceed with your assembly. After use expel any air in the tube, and close the cap. Store in a cool dark place.
Oxygen sensor safe, non-corrosive
Can be applied to Chain cases, oil pans, crack cases, etc
Motor cycle sealant
Can be used for crank cases
Use without a gasket
More viscous than 1104
Doesn't sag
Impervious to petrol, oil, gas, water
Very good for copper head gaskets on race engines
Can be used on all types of head gaskets instead of hylomar
Pulls apart quiet easy and cleans up
Copper Gasket can be re-used
Temp range -60 to 250 degrees C