Hydraulic Oil Iso100 200Lt

PRODUCT DESCRIPTION:
Hydraulic Oils are blended from high-quality mineral oils possessing a high viscosity index and low pour point. These oils give a long trouble-free service life and will be chemically stable under severe operating conditions. They give excellent protection against corrosion; resist emulsification and any formation of unwanted stable foam. The continuing trend towards higher hydraulic system pressure permits higher performance and reductions in pump and equipment sizes. At the same time, the hard-working hydraulic oil is called upon to lubricate, seal and cool the working components under increasing temperature, turbulence and pressure. Any entrained air must be readily released as pressures often exceed 7 mpa (1000 psi) and heavy pump water can only be avoided by using oils containing anti-wear additives. Hydraulic Oils are formulated to meet all these requirements, using paraffinic, high viscosity index mineral oil, augmented with performance additives including a zinc anti-wear treatment.
BENEFITS:
The performance benefits of Hydraulic Oils include:
Superior hydrolytic stability
Outstanding thermal and oxidation stability
Good demulsibility and anti-foam properties
Excellent EP performance
Excellent rust protection
Lower tendency to block filters
Reduced pump wear
SPECIFICATIONS:
Hydraulic Oils meet or exceed the requirements of many international tests and specifications for industrial and mobile hydraulic systems including:
Vickers I-286-S, M-2950-S
AFNOR NFE 48-603 HM (now ISO 11158))
Hagglunds-Denison HF-0, HF-1, HF-2
AFNOR NFE 48-691 (wet)
ASTM D 6158
SS155434
DIN 51524, Part 2 (HLP)
ISO 6743/4 (HM)
US Steel 126, 136, 127
SEB 181 222
Racine, variable volume vane pumps
VDMA 24318
Commercial Hydraulics
ISO 11158 HM
Fives Cincinnati P-68, P-69, P-70
Eaton Brochure 03-401-2011